011520 SIP 2 x 2 Ceiling Tile Drop-In Speaker
Part Number: 011520
MSRP: $0.00
- Description
- Features
- Specs
- FAQs
- Installation
- Downloads
The SIP 2 x 2 Ceiling Tile Drop-In Speaker is a Power-over-Ethernet (PoE 802.3af/802.3at) and Voice-over-IP (VoIP) public address indoor speaker that easily connects into existing local area networks with a single CAT5/6 cable connection. The speaker is compatible with most IP PBX servers. In a non-SIP environment, the speaker is capable of playing audio from a multicast source.
CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP products.
- Simultaneous SIP and multicast
- Paging prioritization
- Supports user-uploadable ring and alert tones, and up to ten stored messages
- Support for security code to prevent unwanted SIP calls
- Can receive pages directly from Poly phones as well as other devices that can send standard multicast
- Loud/Night Ringer function - second SIP extension
- Support for 10 multicast paging groups
- Can drive one external analog speaker for greater coverage
- DTMF-controlled relay
- Line-out connection
- Network speaker volume control
- TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
- Autoprovisioning via HTTP, HTTPS, or TFTP
- HTTPS or HTTP web based configuration. HTTPS is enabled by default
- 802.11q VLAN tagging
- Configurable event generation for device health and status monitoring
- Web-based upgradeable firmware
- Support for multiple SIP servers for redundancy
| Ethernet I/F | 10/100 Mbps |
| Protocol | SIP RFC 3261 Compatible |
| Power Input | PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included) |
| Audio Output | 802.3af - SPL 103 dB @ 1 meter 802.3at - SPL 105 dB @ 1 meter |
| On-Board Relay | 1A @ 30 VDC |
| Payload Types | G.711 a-law, G.711μ-law, G.722, and G.729 |
| Network Security | TLS/SSL 1.2 and SRTP |
| Operating Range |
Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) |
| Storage Altitude | Up to 15,000 ft. (4573 m) |
|
Dimensions (Unit)* |
Length: 23.8 in. [605 mm] Width: 3 in. [77 mm] Height: 23.8 in. [605 mm] |
|
Dimensions (Boxed) |
Length: 25.5 in. [647.7 mm] Width: 4.0 in. [101.6 mm] Height: 24.5 in. [622.3 mm] |
| Weight | 12.0 lbs. [5.44 kg] |
| Boxed Weight | 14.0 lbs. [6.35 kg] |
| Compliance | CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant |
| Warranty | 2 Years Limited |
| Part Number | 011520 |
*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
Where should I install this product?
The SIP Speakers are all designed for a quieter environment such as a classroom, hallway, or an office. If you need a speaker for a high noise/harsh conditions environment such as a warehouse floor or a school field, we instead recommend the 011457 SIP IP66 Outdoor Horn. In the case of requiring two-way audio like our SIP Talk-Back Speaker provides, the CyberData Intercoms may be a better choice for a louder environment. Please contact our sales team for more information.
How do I update my firmware?
Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab.
PLEASE NOTE: If you are downgrading, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings.
Is this device compatible with my service provider or IP-PBX server?
CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information.
What is multicast?
IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.
Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.
CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.
Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device?
For additional support or answers to questions not covered on this page, who should I contact?
- Typical Installation
- Mounting
- Dimensions
Description
The SIP 2 x 2 Ceiling Tile Drop-In Speaker is a Power-over-Ethernet (PoE 802.3af/802.3at) and Voice-over-IP (VoIP) public address indoor speaker that easily connects into existing local area networks with a single CAT5/6 cable connection. The speaker is compatible with most IP PBX servers. In a non-SIP environment, the speaker is capable of playing audio from a multicast source.
CyberData has maintained one of the most comprehensive lists of IP PBX servers certified to work with CyberData VoIP products.
Features
- Simultaneous SIP and multicast
- Paging prioritization
- Supports user-uploadable ring and alert tones, and up to ten stored messages
- Support for security code to prevent unwanted SIP calls
- Can receive pages directly from Poly phones as well as other devices that can send standard multicast
- Loud/Night Ringer function - second SIP extension
- Support for 10 multicast paging groups
- Can drive one external analog speaker for greater coverage
- DTMF-controlled relay
- Line-out connection
- Network speaker volume control
- TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
- Autoprovisioning via HTTP, HTTPS, or TFTP
- HTTPS or HTTP web based configuration. HTTPS is enabled by default
- 802.11q VLAN tagging
- Configurable event generation for device health and status monitoring
- Web-based upgradeable firmware
- Support for multiple SIP servers for redundancy
Specs
| Ethernet I/F | 10/100 Mbps |
| Protocol | SIP RFC 3261 Compatible |
| Power Input | PoE 802.3af/802.3at compliant or 24VDC @ 1A Auxiliary Power Supply (not included) |
| Audio Output | 802.3af - SPL 103 dB @ 1 meter 802.3at - SPL 105 dB @ 1 meter |
| On-Board Relay | 1A @ 30 VDC |
| Payload Types | G.711 a-law, G.711μ-law, G.722, and G.729 |
| Network Security | TLS/SSL 1.2 and SRTP |
| Operating Range |
Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) |
| Storage Altitude | Up to 15,000 ft. (4573 m) |
|
Dimensions (Unit)* |
Length: 23.8 in. [605 mm] Width: 3 in. [77 mm] Height: 23.8 in. [605 mm] |
|
Dimensions (Boxed) |
Length: 25.5 in. [647.7 mm] Width: 4.0 in. [101.6 mm] Height: 24.5 in. [622.3 mm] |
| Weight | 12.0 lbs. [5.44 kg] |
| Boxed Weight | 14.0 lbs. [6.35 kg] |
| Compliance | CE; EMC Directive - Class A EN 55032 & EN 55024, LV Safety Directive- EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant |
| Warranty | 2 Years Limited |
| Part Number | 011520 |
*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
FAQs
Where should I install this product?
The SIP Speakers are all designed for a quieter environment such as a classroom, hallway, or an office. If you need a speaker for a high noise/harsh conditions environment such as a warehouse floor or a school field, we instead recommend the 011457 SIP IP66 Outdoor Horn. In the case of requiring two-way audio like our SIP Talk-Back Speaker provides, the CyberData Intercoms may be a better choice for a louder environment. Please contact our sales team for more information.
How do I update my firmware?
Go to the Downloads tab, click on the serial number range matching your device and download the firmware compatible with it. To update the firmware, unzip the file and log in to the web GUI for the device you are trying to upgrade. Navigate to the Firmware tab and browse for the firmware file you just downloaded. Select and upload that file. Do not reboot, the device will do it for you. For more information, please check your product’s Operations Guide, also available under the Downloads tab.
PLEASE NOTE: If you are downgrading, please contact CyberData’s Technical Support Department first to ensure the device does not get damaged. We also recommend you export a copy of your current configuration BEFORE updating, should a loss of power or another issue occur that would potentially lose your settings.
Is this device compatible with my service provider or IP-PBX server?
CyberData VoIP products are compatible with IP-PBX servers that support standard SIP protocol. You can find a full list of IP-PBX servers that CyberData products have been validated on by going to Connecting to Compatible IP-PBX Servers. If you do not see your IP-PBX on this list, feel free to contact CyberData’s Technical Support Department for more information.
What is multicast?
IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.
Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.
CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.
Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device?
For additional support or answers to questions not covered on this page, who should I contact?
Installation
- Typical Installation
- Mounting
- Dimensions
Downloads