011528 In-Wall 2-Port Gigabit PoE Switch

The CyberData In-Wall 2-Port Gigabit PoE Switch is a flush-mount version of our popular desktop device which expands a single PoE network connection into one or two PoE network ports.

Pass through PoE Power

The In-Wall 2-Port Gigabit PoE Switch is powered from a single 802.3at or 802.3af network switch or power source and passes that power through to one or both of the switch ports.

In the basic configuration, one of the Gigabit ports can drive a VoIP phone directly with PoE and the other Gigabit port can be connected to a user’s PC.

No external power supplies are required.

Discreet Mounting

The In-Wall mounting option protects the switch while offering a cleaner drop directly from a standard size single gang wall outlet.

Power

Fully compliant to IEEE 802.3af/at standard

1 Power Device (PD) input port 802.3af or 802.3at

2 Power Source Equipment (PSE) output ports 802.3af or 802.3at (dependent on PD input)

 

Data

All ports are 10/100/1000Mbps (10BASE-T,100BASE-TX,1000BASE-T) auto sensing based upon the port's individual connection

Each port has auto MDI-X

802.11q VLAN tagging

Automatic address learning, address aging and address migration

Supports 9216-byte jumbo frame length

 

Notification

Link/Status and connection speed LEDs

 

Mounting

No punch down tool required; RJ45 connector input port

Ethernet I/F	10/100/1000 Mbps, Auto MDI-X, RJ45
Power Distribution
Input	PD input up to 30W: 802.3af @ 15W 802.3at @ 25W Generic PoE Injector up to 30W
Internal Circuit Use	2W
Output*	Power available to share between two PSE outputs: 13W with 802.3af input 23W with 802.3at input 28W with generic 30W PoE injector input
Operating Range	Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing
Storage Temperature	-40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)
Storage Altitude	Up to 15,000 ft. (4573 m)
Dimensions**	Length: 2.76 inches [70 mm] Width: 3.90 inches [99 mm] Height: 4.57 inches [116 mm]
Weight Boxed Weight	0.56 lbs. [0.25 kg] 1.0 lbs. [.54 kg]
Compliance	CE: EMC Directive - Class A EN 55032, EN 55035 & EN 61000, LV Safety Directive- EN 62368-1, RoHS Compliant; FCC Part 15 Class A; IEEE 802.3 Compliant
Warranty	2 years limited
Part Number	011528

*Either one or both of the PSE outputs can provide PoE power as long as the overall PSE output wattage is 2W less than the PD input.

**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.

Typical Installation

Use Case Installation – Power Two 802.3af Cameras at Hallway Corner

Typical Wall Installation

Dimensions

Documentation
Description	Date
PDF Datasheet	DATE:5/19/21
PDF Quick-Reference Placemat	DATE:5/20/21