011414 SIP h.264 Video Outdoor Intercom with Keypad
Part Number: 011414
MSRP: $1,176.00
- Description
- Features
- Specs
- FAQs
- Installation
- Downloads
This outdoor intercom with h.264 video connects to your VoIP phone system providing clear two-way audio, visual confirmation and secure access control.
This device is constructed to protect it from vandalism while the weatherproofing protects it from your elements.
If you are looking for an easy to install, secure access control intercom with camera and built-in dry contact to trigger doors and gates, this is it.
CyberData's SIP enabled VoIP products are compatible with a vast majority of VoIP systems including SBCs, Gateways, and phone systems both on-premise and cloud-based.
- Full duplex audio with enhanced acoustic echo cancelling
- Half duplex push-to-talk audio from the phone side using the phone's keypad or from the intercom side using the call button
- Relay configurable for secure access in all keypad modes
- Security mode allows for up to 500 user codes with configurable times and blacklisting plus extension dialing
- Simultaneous SIP and multicast
- Supports user-uploadable ring and alert tones
- Loud/Night Ringer function - second SIP extension
- Can receive pages directly from Poly phones as well as other devices that send standard multicast
- Adjustable camera angle
- DTMF-controlled dry relay contact for auxiliary control
- Door closure and tamper alert signal
- 12-key keypad with backlight
- Programmable speed dial
- Network volume control
- Supports Outdoor Auxiliary Strobe Kit for IP66-rated outdoor visual notification
- TLS 1.2 enhanced security for IP endpoints in a local or cloud-based environment
- Autoprovisioning via HTTP, HTTPS, or TFTP
- HTTPS or HTTP web-based configuration. HTTPS is enabled by default
- Configurable event generation for device health and status monitoring
- 802.11q VLAN tagging
- Web-based upgradeable firmware
- Support for Cisco SRST resiliency
| Ethernet I/F | 10/100 Mbps |
| Protocol | SIP RFC 3261 Compatible |
| Power Input | PoE 802.3af compliant or +8 to +12VDC @ 1000mA Regulated Power Supply (not included) |
| Audio Output (Max) Power Rating (Max) |
802.3af: 86dB @ 1 meter 802.3af: 5-Watts |
| On-Board Relay | 1A @ 30 VDC |
| Payload Types | G.711 a-law, G.711μ-law, G.722, and G.729 |
| Video Codec | H.264 Baseline |
| Camera Resolution | 320 x 240 |
| SIP Video Payload | Baseline profile @ 320x240 |
| Video Lens Angle | 72 degrees, with 30 degree mechanical adjustment |
| Network Security | TLS 1.2 |
| IP Rating | IP65 |
| Operating Range | Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) |
| Storage Altitude | Up to 15,000 ft. (4573 m) |
| Dimensions* |
Length: 7.480 inches [190 mm] Width: 2.284 inches [58 mm] Height: 5.118 inches [130 mm] |
|
Weight Boxed Weight |
2.8 lbs. [1.27 kg] 4.0 lbs. [1.81 kg] |
| Compliance | CE: EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive EN 62368-1; RoHS Compliant; FCC Part 15 Class; Industry Canada ICES-3 Class A; IEEE 802.3 Compliant; TAA Compliant |
| Warranty | 2 Years Limited |
| Part Number | 011414 |
| Note | Electronics are conformal coated for environmental protection. |
Note: Electronics are conformal coated for environmental protection.
*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
How loud is the speaker on the Intercom?
How do I update my firmware?
Is earth ground installation required for this CyberData product?
How can I prevent water or weather damage to the device if it is in a vulnerable location?
Is this device compatible with my service provider or IP-PBX server?
What is multicast?
Which IP Phones do you recommend for setting up a Peer to Peer SIP call with this device?
For additional support or answers to questions not covered on this page, who should I contact?
Typical Installation
Dimensions
Overview of Installation Types Outdoor on Surface
Cable Routing
Mounting
Onboard Terminals
All firmware files include release notes and an autoprovisioning template.
Please back up your configuration before uploading firmware, and restore factory defaults after the upload is complete.