**NEW RELEASE** 011592 InformaCast® Enabled Paging 25V/70V Amplifier
Part Number: 011592
MSRP: $1,406.00
- Description
- Features
- Specs
- FAQs
- Installation
- Downloads
The InformaCast® Enabled Paging 25V/70V Amplifier is an analog/IP hybrid, cost-effective paging solution. It allows customers to use CyberData's or their existing 70V, 25V, constant voltage speakers, and/or CyberData multicast endpoints in a Singlewire InformaCast® environment.
The InformaCast® Enabled Paging 25V/70V Amplifier receives InformaCast® audio messages and sends those to existing 70V or 25V analog speakers. More sound endpoints can be added with either additional 25V/70V Amplifiers and/or CyberData's multicast-supported line of products.
- Supports one analog zone with hundreds* of 25V or 70V speakers/horns with a single home run cable to the Amplifier.
- Compatible with Singlewire InformaCast®, including support for downloading SIP credentials from InformaCast®
- Relays InformaCast® broadcasts to multicast endpoints
- Can page to unlimited endpoints that are enabled to receive multicast or Poly pages on any Poly channel
- Master analog volume adjustment via web interface or front panel LCD controls
- Calendar based bell scheduler
- Support for security code to prevent unwanted paging access
- Supports 100 DTMF controlled paging groups, that can transmit audio via multicast and the single analog channel
- Can receive pages directly from Poly phones as well as other devices that can send standard multicast
- Supports call-in stored message recording
- Paging prioritization
- Loud/Night Ringer function - second SIP extension
- Supports delayed pages, i.e. call buffering
- Supports multiple user accounts
- Fault sense input
- Line-in for background music
- Page to any Multicast enabled SIP Phone
- LCD display for monitoring device status, configuration and diagnostics
- Configurable alerts for amplifier temperature threshold, protection, and recovery modes.
- 19-inch rack mountable with removable rack ears
- TLS 1.2 and SRTP enhanced security for IP Endpoints in a local or cloud-based environment
- HTTPS web based configuration
- Support for Cisco SRST resiliency
- Autoprovisioning via HTTPS, HTTP or TFTP
- Configurable event generation for device health and status monitoring
- 802.11q VLAN tagging
* Number of speakers supported will depend on the tap setting and the baseline voltage in your typical configuration.
Continuous power output is up to 392W when in 70V mode and 160W when in 25V mode.
| Ethernet I/F | 10/100 Mbps |
| Protocol | SIP RFC 3261 Compatible, InformaCast® v 4.0 or above |
| Power Input | AC Voltage Input 100-240VAC, 50/60 Hz |
| Analog Zone Output: | Continuous power output of up to 392W when driving 70V distributed speakers, equivalent load > 12-Ohms Continuous power output of up to 160W when driving 25V distributed speakers, equivalent load > 4-Ohms. |
|
Line In: Input Signal Amplitudes Input Impedance |
2.0 VPP Maximum 10k Ohm |
|
Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance |
2.0 VPP Maximum +2dBm nominal 0.5% maximum 10k Ohm |
| Payload Types | G.711 a-law, G.711μ-law, G.722 and G.729 |
| Network Security | TLS 1.2, SRTP, HTTPS |
| Operating Range | Temperature: 15 degrees C to 27 degrees C (60 degrees F to 80 degrees F) Humidity: 5-95%, non-condensing |
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) |
| Storage Altitude | Up to 15,000 ft. (4573 m) |
| Dimensions* | 19.0 inches [482.6 mm] Length (with rack ears) 16.85 inches [428.0 mm] Length (w/o rack ears) 10.83 inches [275.0 mm] Width 2.25 inches [57.2 mm] Height |
|
Weight Boxed Weight |
11.2 lbs [5.1 kg] 17.8 lbs [8.1 kg] |
| Compliance | CE: EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 62368-1; RoHS Compliant; FCC Part 15 Class A; Industry Canada ICES-3 Class A; IEEE 802.3 Compliant; TAA Compliant |
| Warranty | 2 Years Limited |
| Part Number | 011592 |
*Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
How do I update my firmware?
Is this device compatible with my service provider or IP-PBX server?
What is multicast?
How do I page to phones that can listen to Multicast?
How many Poly channels can the InformaCast® Enabled Paging 25V/70V Amplifier page to?
How many zones does the InformaCast® Enabled Paging 25V/70V Amplifier support?
Which is louder, 25V or 70V?
How many speakers can be connected to a single InformaCast® Enabled Paging 25V/70V Amplifier?
Will the InformaCast® Enabled Paging 25V/70V Amplifier work with any speaker?
What wire gauge should be used with the InformaCast® Enabled Paging 25V/70V Amplifier?
How should speakers be wired to the InformaCast® Enabled Paging 25V/70V Amplifier?
Can it receive multicast?
Can this be connected to an external amplifier?
Can this be used with self-amplified speakers?
Typical Installation
Dimensions
Connections
Mounting
General Wire Recommendation for 25V or 70V Speakers
All firmware files include release notes and an autoprovisioning template.
Please back up your configuration before uploading firmware, and restore factory defaults after the upload is complete.
| Bell Scheduler | |
|---|---|
| Description | Date |
| FIRST: Register your device | - |
| User Uploadable Bells | - |
| Documentation | |
| Description | Date |
| PDF Datasheet | DATE:5/9/24 |
| PDF Quick Start Guide | DATE:2/7/25 |
| PDF Quick-Reference Placemat | DATE:5/16/24 |
| PDF Operations Guide (firmware version 22.0) | DATE:3/27/25 |
| PDF Operations Guide (firmware version 21.0.0) | DATE:8/6/24 |
| Firmware, Drivers & Utilities | |
| TERMINUS ZIP Firmware 22.0.0. For more information, see the release notes. *Note* Upgrade will take 6 minutes to complete and cause your device to reboot twice. Device cannot revert to previous versions. | DATE:11/19/24 |
| ZIP The Discovery Utility scans the network for any CyberData devices. | |