![011406 InformaCast® Enabled Loudspeaker Amplifier (AC-Powered) [Replacement Product Below]](http://www.cyberdata.net/cdn/shop/products/011404-components_be938780-6869-4f68-ac37-de34831d2f96_1024x1024.png?v=1554237462)
011406 InformaCast® Enabled Loudspeaker Amplifier (AC-Powered) [Replacement Product Below]
Part Number: 011406
MSRP: $0.00
- Description
- Features
- Specs
- FAQs
- Installation
- Downloads
The CyberData InformaCast Enabled Loudspeaker Amplifier is for use with Singlewire's InformaCast paging and emergency notification software.
This AC-powered paging device and loud ringer is for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone system.
The InformaCast Enabled Loudspeaker Amplifier can have one or two 011471 IP66 Analog Horns attached. See more details in the Operations Guide or under the Installation tab above.
| Ethernet I/F | 10/100 Mbps | |
| Protocol | SIP RFC 3261 Compatible | |
| Notification Software | Singlewire InformaCast v4.0 and above | |
| Power Input | PoE 802.3at | |
| Audio Output | 117.9 (+/- 0.2) dBC @1M and 1kHz* | |
|
Line In: Input Signal Amplitudes Input Impedance |
2.0 VPP Maximum 10k Ohm |
|
|
Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance |
2.0 VPP Maximum +2dBm nominal 0.5% maximum 10k Ohm |
|
| On-Board Relay | 1A @ 30 VDC | |
| Payload Types | G.711 a-law, G.711 µ-law, G.722, and G.729 | |
| Network Security | TLS/SSL 1.2 and SRTP | |
| Enclosure | UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure | |
| Operating Range | Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
|
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) | |
| Storage Altitude | Up to 15,000 ft. (4573 m) | |
| Dimensions** | 10 in. [254 mm] Length 4 in. [101.6 mm] Width 14 in. [355.6 mm] Height |
|
|
Weight Boxed Weight |
4.2 lbs. [1.91 kg] 5.2 lbs. [2.39 kg] |
|
| Compliance | CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant | |
| Warranty | 2 Years Limited | |
| Part Number | 011406 |
*When used with the optional 011471 IP66 Analog Horn (sold separately)
**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
What is multicast?
IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.
Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.
CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.
Questions regarding Singlewire-enabled devices?
I am looking for an approved panic button to connect to your amplifiers that has a cover over the panic button to avoid accidental pressing and also one that may be waterproof for outside use.
See the following webpage for a nice selection: https://www.sti-usa.com/pcategories/waterproof_buttons_and_switches/
Typical Installation
Speaker Connection Options
Upload an Audio Message
Connecting the Auxiliary RGB Strobe Kit to the Loudspeaker Amplifier
High Power Mode One Speaker
High Power Mode Two Speakers
Typical Warehouse Paging Setup
Intelligibility Outdoor Field Test
Components
Replacing the Speaker Wire
IP66 Weatherproofing
Suggested Installation of the Horn
Description
The CyberData InformaCast Enabled Loudspeaker Amplifier is for use with Singlewire's InformaCast paging and emergency notification software.
This AC-powered paging device and loud ringer is for use in places that need loud paging. It provides an easy method for implementing an IP-based overhead paging system for your existing or new VoIP Phone system.
The InformaCast Enabled Loudspeaker Amplifier can have one or two 011471 IP66 Analog Horns attached. See more details in the Operations Guide or under the Installation tab above.
Features
Specs
| Ethernet I/F | 10/100 Mbps | |
| Protocol | SIP RFC 3261 Compatible | |
| Notification Software | Singlewire InformaCast v4.0 and above | |
| Power Input | PoE 802.3at | |
| Audio Output | 117.9 (+/- 0.2) dBC @1M and 1kHz* | |
|
Line In: Input Signal Amplitudes Input Impedance |
2.0 VPP Maximum 10k Ohm |
|
|
Line Out: Output Signal Amplitudes Output Level Total Harmonic Distortion Output Impedance |
2.0 VPP Maximum +2dBm nominal 0.5% maximum 10k Ohm |
|
| On-Board Relay | 1A @ 30 VDC | |
| Payload Types | G.711 a-law, G.711 µ-law, G.722, and G.729 | |
| Network Security | TLS/SSL 1.2 and SRTP | |
| Enclosure | UL 94-HB flame resistant, IK 08 Impact-rated, IP66 enclosure | |
| Operating Range | Temperature: -40 degrees C to 55 degrees C (-40 degrees F to 131 degrees F) Humidity: 5-95%, non-condensing |
|
| Storage Temperature | -40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F) | |
| Storage Altitude | Up to 15,000 ft. (4573 m) | |
| Dimensions** | 10 in. [254 mm] Length 4 in. [101.6 mm] Width 14 in. [355.6 mm] Height |
|
|
Weight Boxed Weight |
4.2 lbs. [1.91 kg] 5.2 lbs. [2.39 kg] |
|
| Compliance | CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant | |
| Warranty | 2 Years Limited | |
| Part Number | 011406 |
*When used with the optional 011471 IP66 Analog Horn (sold separately)
**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.
FAQs
What is multicast?
IP multicast is a technique for one-to-many communication over a local IP network. IGMP multicast is sent via UDP packets from a multicast server to a multicast receiver. This stream scales to a larger receiver population by not requiring prior knowledge of who or how many receivers there are. Multicast uses network infrastructure efficiently by requiring the source to send a packet only once, even if it needs to be delivered to many receivers. The network replicates the packet in order to reach multiple receivers only when necessary.
Multicast is a great alternative to SIP registration as it does not require that the recipient of the stream to register as an extension on an IP-PBX server.
CyberData products support both regular IGMP multicast as well as proprietary Polycom Group Paging.
Questions regarding Singlewire-enabled devices?
I am looking for an approved panic button to connect to your amplifiers that has a cover over the panic button to avoid accidental pressing and also one that may be waterproof for outside use.
See the following webpage for a nice selection: https://www.sti-usa.com/pcategories/waterproof_buttons_and_switches/
Installation
Typical Installation
Speaker Connection Options
Upload an Audio Message
Connecting the Auxiliary RGB Strobe Kit to the Loudspeaker Amplifier
High Power Mode One Speaker
High Power Mode Two Speakers
Typical Warehouse Paging Setup
Intelligibility Outdoor Field Test
Components
Replacing the Speaker Wire
IP66 Weatherproofing
Suggested Installation of the Horn
Downloads